Overview of shot blasting cleaning machine
JYPL100 tracked shot blasting machine is a variety of products that is redesigned, rectified, and improved based on the latest technology of similar foreign products, in addition to the original products of Chinese peers. Suitable for surface cleaning of castings, forgings, stamped parts, heat treated parts, and other parts. Not only does it remove the oxide layer and bonding material on the surface of the parts, but it also optimizes the process state of the workpiece surface and improves the surface quality of the workpiece. After shot blasting treatment, the workpiece can obtain good material color, providing a good substrate for electroplating and paint coating. This equipment has a compact structure, smooth operation, high production efficiency, good cleaning quality, and safe and reliable operation.
2. Working principle of shot blasting cleaning machine
This machine is a rubber track type shot blasting cleaning machine. Mn13 wear-resistant protective plates are laid on both sides of the shot blasting room. The projectile enters the high-speed rotating dividing wheel through the chute of the shot blasting machine by its own weight and rotates together with it. Under the action of centrifugal force, the projectile enters the directional sleeve and is ejected from the rectangular window of the directional sleeve, reaching the high-speed rotating blade. The projectile accelerates from the inside out on the surface of the blade and is thrown in a fan-shaped shape at a certain linear speed towards the workpiece, exerting strong impact and scraping on the oxide layer and adhesive material on its surface to achieve the purpose of cleaning the oxide layer and adhesive material. The particles that have lost energy slide down the slope below the main machine, are transported to the bottom of the elevator through a spiral conveyor, then lifted by a small hopper and sent to the top of the elevator. Finally, they return to the shot blasting machine along the spiral conveyor of the separator and work in a cycle. The workpiece is placed on the track and flipped over with the movement of the track, so that all surfaces of the workpiece in the cleaning room can be shot blasted clean.
Product model | JY1080 |
Shot blasting chamber size | 600x896mm |
Blast chamber capacity | 100L |
Shot blasting ability | 200kg/min |
Increase separation capacity | 6t/h |
Pill sand separation method | 过滤筛+风选 |
Dust collection air volume | 2000m³/h |
Total power | 12.15kw |
Equipment dimensions | 2100 x1800 x2680mm |
Weight of individual workpiece | ≤10kg |
Number of shot blasting rounds | 1 |
